Allied-telesis AT-S62 Manual do Utilizador descarregar pdf (Página 305)

100

101

AT-S62 User’s Guide

Section III: SNMPv3 Operations 305

2-v2c

Select this value if this User Name is associated with the SNMPv2c

protocol.

3-v3

Select this value if this User Name is associated with the SNMPv3

protocol.

7. After making changes, type R until you return to the Main Menu. Then

type S to select Save Configuration Changes.

Modifying the Security Level

For the Security or User Name you have selected, the value of the

Security Level parameter in an SNMPv3 Target Parameter Table entry

must match the value of the Security Level parameter in the SNMPv3

User Table entry.

To modify the Security Level parameter in an SNMPv3 Target Parameter

Table entry, perform the following procedure.

1. Follow steps 1 through 3 in the procedure described in Creating an

SNMPv3 User Table Entry on page 234. Or, from the Main Menu type

5->5->5.

The Configure SNMPv3 Table Menu is shown in Figure 71 on page

235.

2. From the Configure SNMPv3 Table Menu, type 8 to select Configure

SNMPv3 Target Address Table.

The Configure SNMPv3 Target Parameters Table Menu is shown in

Figure 84.

3. From the Configure SNMPv3 Target Parameters Table Menu, type 3 to

select Modify SNMPv3 Table Entry.

The Modify SNMPv3 Target Parameters Table Menu is shown in

Figure 85 on page 303.

4. To modify the Security Level, type 3 to select Set Security Level.

The following prompt is displayed:

Enter Target Parameters Name:

5. Enter a previously configured Target Parameters Name.

Enter a value of up to 32-alphanumeric characters.

The following prompt is displayed:

Enter Security Level [N-NoAuthNoPriv, A-AuthNoPriv,

P-AuthPriv]:

6. Enter the Security Level.

1 2 ... 300 301 302 303 304 305 306 307 308 309 310 ... 861 862

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S62 Manual do Utilizador Página 305

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S62