Allied-telesis AT-S62 Manual do Utilizador Página 75

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 862
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 74
AT-S62 User’s Guide
Section I: Basic Operations 75
Pinging a Remote System
You can instruct the switch to ping a remote device on your network.
This procedure is useful in determining whether a valid link exists
between the switch and another device.
Note
The switch must have an IP address to perform this procedure.
To instruct the switch to ping a network device, perform the following
procedure:
1. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown in Figure 7 on page 59.
2. From the System Administration menu, type 9 to select System
Utilities.
The System Utilities menu is shown in Figure 9 on page 64.
3. For the System Utilities menu, type 3 to select Ping a Remote System.
The following prompt is displayed:
Please enter an IP address ->
4. Enter the IP address of the end node you want the switch to ping.
The results of the ping command are displayed on the screen.
5. To stop the ping, press any key.
Vista de página 74
1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 861 862

Comentários a estes Manuais

Sem comentários