Allied-telesis AT-S62 Manual do Utilizador descarregar pdf (Página 756)

100

101

Chapter 45: STP, RSTP, and MSTP

Section VIII: Web Browser Management 756

2. To create or delete an MSTI ID and to associate VLANs to MSTIs, do the

following:

a. In the CIST/MSTI Table section of the menu, click Add.

The Add New MSTI window is shown in Figure 271.

Figure 271 Add New MSTI Window

b. In the MSTI ID field, enter a new MSTI ID. The range is 1 to 15.

c. In the Priority field, enter a MSTI Priority value. This parameter is

used in selecting a regional root for the MSTI. The range is 0 (zero)

to 61,440 in increments of 4,096, with 0 being the highest priority.

This parameter is used in selecting a regional root for the MSTI.

For a list of the increments, refer to Table 12 on page 331. The

default is 0.

d. In the VLAN List field, enter the VIDs of the VLANs to be associated

with this MSTI. You can specify more than one VID at a time (e.g.,

2,4,7).

e. Click Apply.

f. Repeat this procedure to create more MSTI IDs.

3. To add or remove VLANs or to change the MSTI Priority value of an

existing MSTI ID, do the following:

a. In the CIST/MSTI Table section of the menu, click the circle next to

the MSTI ID you want to modify. You can select only one MSTI ID

at a time. You cannot modify CIST.

b. Click Modify.

1 2 ... 751 752 753 754 755 756 757 758 759 760 761 ... 861 862

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S62 Manual do Utilizador Página 756

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S62