Allied-telesis AT-S79 Manual do Utilizador descarregar pdf (Página 127)

AT-S79 Management Software User’s Guide

Section I: Using the Menus Interface 127

Configuring Broadcast Storm Control

To configure the broadcast storm control feature, perform the following

procedure:

1. From the Main Menu, type B to select Basic Switch Configuration.

The Basic Switch Configuration Menu is shown in Figure 4 on page 30.

2. From the Basic Switch Configuration Menu, type C to select Storm

Control Configuration.

The Storm Control Configuration Menu is shown in Figure 30.

Figure 30. Storm Control Configuration Menu

3. Type B to select Broadcast Storm Status.

The following prompt is displayed:

Enable or Disable broadcast storm control (E/D)>

4. Type E to enable broadcast storm control or D to disable broadcast

storm control.

5. If you are activating the feature, type T to select Threshold.

The following prompt is displayed:

Enter threshold level>

6. Specify the broadcast threshold. Choices are:

 H for High (3000 broadcast packets per second)

 M for Medium (500 broadcast packets per second)

AT-GS950/16 Local Management System

Basic Switch Configuration -> Storm Control Configuration Menu

Broadcast Storm Status : Disabled

Threshold : Low

----------------------- <COMMAND> -----------------------------

Set [B]roadcast Status

Set [T]hreshold

[Q]uit to previous menu

Command>

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 209 210

Sem comentários

Allied-telesis AT-S79 Manual do Utilizador Página 127