Allied-telesis AT-S95 CLI (AT-8000GS Series) Manual do Utilizador descarregar pdf (Página 325)

100

101

System Management Commands

Page 325

Syntax

stack reload [unit unit]

Parameters

•

unit — Number of the unit to be reloaded (Range: 1 - 6)

Default Configuration

All units are reloaded.

Command Modes

Privileged EXEC mode

User Guidelines

This command is not relevant to standalone devices.

If no unit is specified, all units are reloaded.

Example

The following example reloads Unit 2 of the stack.

stack change unit-id

The stack change unit-id Global Configuration mode command is used to change the Unit ID of a specific unit.

Syntax

stack change unit-id unit-number to new-unit-number

Parameters

•

unit-number — Specifies the current number of the unit. (Range: 1 - 6)

• new-unit-number — Specifies the new number of the unit. (Range: 1 - 6)

Default Configuration

The automatically configured unit number is assigned.

Command Modes

Global Configuration mode

User Guidelines

This command is not relevant to standalone devices.

The command takes effect only after resetting the device.

console(config)#

stack reload

unit

1 2 ... 320 321 322 323 324 325 326 327 328 329 330 ... 396 397

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S95 CLI (AT-8000GS Series) Manual do Utilizador Página 325

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S95 CLI (AT-8000GS Series)