Allied-telesis AT-S97 Manual do Utilizador descarregar pdf (Página 87)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide

The columns are defined here:

 Chassis ID - The identification number of the chassis. For information,

refer to “Chassis ID Numbers” on page 18.

 Chassis Name - The name of the chassis, set with the SYSTEM SET

CHASSIS command. For information, refer to “SYSTEM SET

CHASSIS” on page 51.

 Chassis Type - The chassis’ model name.

 MAC Address - The chassis’ MAC address.

 Master Chassis - Whether the chassis is the master chassis of a stack.

To be the master chassis of a stack, the status of the chassis’

management module must be set to active. Possible status are:

– Yes: The status of the management module in the

chassis is active, making it the master chassis of the

stack.

– No: The chassis has a stacking module.

 Slot ID: A slot in the chassis. Possible values are:

– M: The management slot, used for the AT-MCF2000M

Management Module and the AT-MCF2000S Stacking

Module.

– number: A media converter slot number (e.g. 1, 2, etc.).

An empty slot is not included in the table.

 Module Name: The name of the module, set with the“SYSTEM SET

MODULE” on page 77.

 Module Type - The module’s model name.

 Software Version - The version number of the module’s AT-S85 or

AT-S97 Management Software.

Example

This command displays information about a chassis with the ID number 0:

system show chassis id=0

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 217 218

Sem comentários

Allied-telesis AT-S97 Manual do Utilizador Página 87