Allied-telesis AT-TQ Series Manual do Utilizador descarregar pdf (Página 149)

AT-TQ Wireless Access Point Series User’s Guide

149

Trap type to send

(continued)

- Filtered STA: This trap is sent when the

access point blocks an unauthorized

wireless client from accessing the network

because the client is not authorized by the

MAC address filter.

- RADIUS Authentication (Success): This

trap is sent when a wireless client

successfully logs on the network using

RADIUS.

- RADIUS Authentication (Fail): This trap

is sent when a wireless client fails to log

on successfully using RADIUS.

Hostname or IP address Specify the SNMP trap receivers to

receive traps from the access point. Here

are the guidelines:

You may specify up to three trap

receivers.

You may specify only one trap receiver

per field.

You have to click the Enabled dialog box

before you can enter or modify a trap

receiver.

You may specify a trap receiver by its IP

address or DNS hostname.

You may not specify an IP address range.

Table 24. SNMP (Continued)

Field Description

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 171 172

Sem comentários

Allied-telesis AT-TQ Series Manual do Utilizador Página 149