Allied-telesis AT-TQ Series Manual do Utilizador descarregar pdf (Página 171)

AT-TQ Wireless Access Point Series User’s Guide

171

The access point displays the “Manage Firmware” window shown in

Figure 55 on page 168.

2. Click the Browse button next to the New Firmware Image field and

locate the new image file on your computer or network server.

3. Click the Upgrade button.

The access point displays a confirmation prompt.

4. Click the OK button to upload the new firmware to the access point or

Cancel to cancel the procedure.

The access point performs the following tasks during the upgrade

procedure:

 Overwrites its secondary image with its current primary image.

 Uploads the new image from your computer or network server.

 Copies the file to flash memory as its new primary image.

 Resets to initialize the new firmware.

Note

The entire process may take up to 10 minutes. Do not close the web

browser window or change to a different window until the entire

procedure is finished. Interrupting the transfer may corrupt the file on

the access point.

5. To resume managing the unit, start a new web browser management

session.

1 2 ... 166 167 168 169 170 171 172

Sem comentários

Allied-telesis AT-TQ Series Manual do Utilizador Página 171