Allied-telesis AT-TQ Series Manual do Utilizador Página 71
- Página / 172
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
AT-TQ Wireless Access Point Series User’s Guide
71
Managing Wireless Distribution System Bridges
A wireless distribution system (WDS) bridge is a wireless link between two
access points. The link allows the units to forward traffic directly to each
other over a wireless connection as if they were connected with a physical
Ethernet wire.
You can use WDS bridges to link network segments with wireless, rather
than wired, connections. This is illustrated in Figure 15 where access
points A and B form a WDS bridge to connect two LAN segments together.
Figure 15. WDS Bridge Used to Connect LAN Segments
You might also use the feature to extend a network into areas where
Ethernet cable installation would be impractical or expensive. In Figure 16,
access point B is located in an area that does not have Ethernet cabling.
Consequently, its LAN port is not connected to the wired network.
However, its wireless clients are able to access the network because of
the WDS bridge to access point A, whose LAN port is connected to the
wired network.
Figure 16. WDS Bridge Used to Extend a Network
Configurations of
WDS Bridges
A WDS bridge can have up to four access points. Figure 17 on page 72
illustrates the supported configurations.
LAN Segment 1 LAN Segment 2
AB
WDS Bridge
LAN Segment
AB
WDS Bridge
- Management Software 1
- User’s Guide 1
- Contents 5
- List of Figures 10
- List of Tables 12
- Contacting Allied Telesis 15
- Overview 17
- Features 19
- 300 Mbps 20
- 450 Mbps 20
- Management Modes and Methods 21
- Chapter 1: Overview 22
- Web Browser 26
- Saving Your 28
- Basic Settings Menu 29
- Displaying Basic Information 30
- Manage Menu 35
- Chapter 3: Manage Menu 36
- IEEE 802.1x 61
- Security 61
- Frequency 74
- Selection 74
- Preparing the 76
- Access Point for 76
- WDS Bridge 77
- “Static WEP” on page 79 78
- “WPA Personal” on page 80 78
- Enabling the 88
- Controller Client 88
- Planning a Cluster 101
- Chapter 4: Cluster Menu 102
- Disabling 112
- Automatic 112
- Assignments 112
- Chapter 5: Status Menu 118
- Viewing System 121
- Event Messages 121
- Configuring the 124
- Syslog Client 124
- Disabling the 125
- Displaying Statistics 130
- Chapter 6: Services Menu 136
- HTTP Server 152
- Configuring the HTTPS Server 153
- HTTPS Server 154
- Chapter 7: Maintenance Menu 162
- Computer 164
- Rebooting the Access Point 166
(322 páginas)
Comentários a estes Manuais