Allied Telesis AT-SB4108-60 Guia de Instalação

SwitchBlade Power Supply UnitQuick Install Guide

10 SwitchBlade Power Supply UnitC613-04028-01 REV D The SwitchBlade Switch Controller Quick Install Guide - This guide outlines the procedure for ins

SwitchBlade Power Supply Unit Quick Install GuideDocument Number C613-04028-01 REV D.Copyright © 2002-2005 Allied Telesyn International, Corp. North C

Quick Install Guide 3C613-04028-01 REV DModels Covered By This GuideThis Quick Install Guide includes information on installing the following power su

4 SwitchBlade Power Supply UnitC613-04028-01 REV DInstalling A Power Supply Unit (PSU)All AC and DC versions of this equipment must be earthed.PSUs ca

Quick Install Guide 5C613-04028-01 REV DFigure 1: ESD socket on the SwitchBlade 8 chassis.5. Remove the PSU bay faceplate or existing PSUTo remove a b

7. Secure the PSU8. Apply power to the PSUFor AC Models:panel (for the triple feed model see Figure 3 on page -7, and for the dual feed model see Figu

Quick Install Guide 7Figure 3: AC power connectors on a CH8 with triple power inlets.Figure 4: AC power connectors on a CH8 with dual power inlets.For

8 SwitchBlade Power Supply Unit• Supports either positive grounded or negative grounded operation.Circuit protection:• Use a 20 Amp circuit breaker fo

Quick Install Guide 9Figure 5: DC power terminals on a CH8 with three power inlets.9. Check the PSU’s LEDsOnce you have inserted the PSUs and powered