Allied Telesis Switch AT-S79 Manual do Utilizador descarregar pdf (Página 17)

AT-S79 Management Software User’s Guide

Local Management Connection

To establish a local management connection with an AT-GS950/16 or

AT-GS950/24 Smart Switch, you connect a terminal or a PC with a

terminal emulator program to the terminal port on the front of the switch

using the management cable included with the unit. This type of

connection is referred to as “local” because you must be physically close

to the switch, such as in the wiring closet where the switch is located.

Note

For instructions on how to start a local management session, refer to

“Starting a Local Management Session” on page 24.

A switch does not need an Internet Protocol (IP) address for you to

manage it locally. You can start a local management session on a switch

at any time. It does not interfere with the forwarding of network packets by

the device.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 241 242

Sem comentários

Allied Telesis Switch AT-S79 Manual do Utilizador Página 17