Allied Telesis AT-S94 Guia do Utilizador descarregar pdf (Página 124)

Page 124

Allied Telesis

AT-S94 Management Software Web Browser Interface User’s Guide

Defining GVRP

The GVRP Page enables users to configure GARP VLAN Registration Protocol (GVRP) on the device. GVRP is

specifically provided for automatic distribution of VLAN membership information among VLAN-aware bridges.

GVRP allows VLAN-aware bridges to automatically learn VLANs to bridge ports mapping, without having to

individually configure each bridge and register VLAN membership.

In the GVRP Page, users can do the following tasks:

• Configuring GVRP

• Enabling/Disabling GVRP on a Port

The settings for the three GVRP timers must be the same on all GVRP-active devices in your network. This is

configurable only in the CLI, using the config-if garp timer command.

Configuring GVRP

To define GVRP on the device:

1. Click Layer 2 > GVRP. The GVRP Page opens:

Figure 79: GVRP Page

The GVRP Page contains the following fields:

• GVRP Global Status — Indicates if GVRP is enabled on the device. The possible field values are:

– Enable — Enables GVRP on the selected device.

– Disable — Disables GVRP on the selected device. This is the default value.

• Select the interfaces displayed in the table.

– Ports of Unit — Specifies the port and stacking member for which the GVRP settings are displayed.

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 253 254

Sem comentários

Allied Telesis AT-S94 Guia do Utilizador Página 124