Allied Telesis AT-S94 Guia do Utilizador descarregar pdf (Página 196)

Page 196

Allied Telesis

AT-S94 Management Software Web Browser Interface User’s Guide

Defining Power Over Ethernet Configuration

To modify PoE port settings:

1. In the Power Over Ethernet Page Zoom View, click the port(s) to modify. The port indication changes to Port

is selected.

2. Click Modify. The Power Over Ethernet Configuration Page opens:

Figure 137:Power Over Ethernet Configuration Page

The Power Over Ethernet Configuration Page displays the currently configured PoE ports and contains the

following information:

• Interface — Displays the selected port’s number.

• Admin Mode — Indicates whether PoE is enabled or disabled on the port. The possible values are:

– Enable — Enables PoE on the port. This is the default setting.

– Disable — Disables PoE on the port.

• Priority Level — Indicates the PoE ports’ priority. The possible values are: Critical, High and Low. The

default is Low.

• Class — Indicates the power class, the IEEE 802.3af class of the device.

• Output Voltage (Volt) — The voltage delivered to the powered device.

• Output Current (mA) — The current drawn by the powered device.

• Output Power (Watt) — Indicates the power being supplied to the device, in Watts.

• Power Limit (Watt) — Indicates the maximum amount of power allowed by the port for the device. The

default is 15400 milliwatts (15.4 W), and the range is 3000 -15400 milliwatts.

• Status — Indicates the state of a PoE-enabled port. The possible field values are:

– On — Indicates the device is delivering power to the interface.

– Off — Indicates the device is not delivering power to the interface.

– Searching — Indicates that the device is currently searching for a powered device. Searching is the

default PoE operational status.

1 2 ... 191 192 193 194 195 196 197 198 199 200 201 ... 253 254

Sem comentários

Allied Telesis AT-S94 Guia do Utilizador Página 196