Allied Telesis AT-S94 Guia do Utilizador descarregar pdf (Página 154)

Page 154

Allied Telesis

AT-S94 Management Software Web Browser Interface User’s Guide

To modify the IGMP Snooping configuration:

1. Click Multicast > IGMP. The IGMP Page opens.

2. Click Modify. The IGMP Configuration Page opens:

Figure 101:IGMP Configuration Page

In addition to the IGMP Page, the IGMP Configuration Page contains the following fields:

• Supported IP Format — Indicates that IPv4 is supported.

• Immediate Leave — Host immediately times out after requesting to leave the IGMP group and not receiving

a Join message from another station.

– Checked — Host immediately times out.

– Unchecked — Host times out as specified in the Leave Timeout field.

3. Define the fields. Select Reset as Default to use the default value.

4. Click Apply. The IGMP Snooping global parameters are modified, and the device is updated.

5. Click Save Config on the menu to save the changes permanently.

Defining Multicast Bridging Groups

The Multicast Group Page displays the ports and trunks attached to the Multicast service group in the Ports and

Trunks tables. The Port and Trunk tables also reflect the manner in which the port or trunks joined the Multicast

group. Ports can be added either to existing groups or to new Multicast service groups. New Multicast service

groups can be created and ports can be assigned to a specific Multicast service address group.

1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 253 254

Sem comentários

Allied Telesis AT-S94 Guia do Utilizador Página 154