Allied-telesis AT-2812FX Manual do Utilizador descarregar pdf (Página 28)

Chapter 2: Installing the Hardware

5. For the 54 mm ExpressCard slot, align the module to the left side of

the slot. See Figure 7.

For laptops with the 34 mm ExpressCard slot, the module fits snugly

into the slot.

Figure 7. Inserting the Module

6. Applying even pressure at both corners of the module, push the

module until it is firmly seated in the PCI ExpressCard slot.

Caution

Do not use excessive force when seating the module, because this

may damage the system or the module. If the module resists

seating, remove it from the system, realign it, and try again.

7. Make sure the module is seated securely.

8. Power the system on.

Once the system returns to proper operation, the module hardware is

fully installed. Next, connect the network cables. See “Connecting the

Network Cables” on page 29.

1713

LINK/ACT

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 81 82

Sem comentários

Allied-telesis AT-2812FX Manual do Utilizador Página 28