Allied-telesis AT-2812FX Manual do Utilizador descarregar pdf (Página 68)

Chapter 6: Setting Advanced Properties

Network Address The Network Address is a user-defined address that is used to replace the

MAC address that was originally assigned to the adapter. The network

address consists of a 12-digit hexadecimal number.

To change the Locally Administered Address property, do the following:

1. Access the Device Manger for your operating system.

 To access the Windows XP Device Manager, see “Selecting the

Device Manager Window” on page 47.

 To access the Windows Vista Device Manager, see “Selecting the

Device Manager” on page 39.

 To access the Windows 7 Device Manager, see “Selecting the

Device Manager Window” on page 54.

2. Click the Advanced tab.

The Advanced tab is shown in Figure 31 on page 64.

3. From the P

roperty list on the Advanced tab, select Network Address.

4. In the V

alue list on the Advanced tab, enter the Locally Administered

Address.

Here are some guidelines:

 The range is 0000 0000 0001 to FFFF FFFF FFFD.

 Do not use a multicast address (least significant bit of the high

byte = 1).

 Do not use all 0's or all F's.

5. Click OK.

6. If prompted to restart your computer, click Yes.

Although it is not necessary to reboot the system for new adapter

properties to take effect, rebooting is recommended to reinitialize all

registers.

7. Verify that the port LED operates as described in “Physical

Description” on page 20.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 81 82

Sem comentários

Allied-telesis AT-2812FX Manual do Utilizador Página 68