Allied-telesis AT-2812FX Manual do Utilizador descarregar pdf (Página 73)

AT-2812FX ExpressCard Fast Ethernet Fiber (SC) Module Installation and User’s Guide

5. Click OK.

6. If prompted to restart your computer, click Yes.

Although it is not necessary to reboot the system for new adapter

properties to take effect, rebooting is recommended to reinitialize all

registers.

7. Verify that the port LED operates as described in “Physical

Description” on page 20.

Wake Up

Capabilities

The Wake Up Capabilities property enables the network adapter to wake

up from a low-power mode when it receives a network wake-up frame.

There are two types of wake-up frames: Magic Packet and Wake Up

Frame. The default setting is Both - which implements both the Magic

Packet and Wake Up Frame.

To change the Wake Up Capabilities property, do the following:

1. Access the Device Manger for your operating system.

 To access the Windows XP Device Manager, see “Selecting the

Device Manager Window” on page 47.

 To access the Windows Vista Device Manager, see “Selecting the

Device Manager” on page 39.

 To access the Windows 7 Device Manager, see “Selecting the

Device Manager Window” on page 54.

2. Click the Advanced tab.

The Advanced tab is shown in Figure 31 on page 64.

3. From the Property list on the Advanced tab, select Wake Up

Capabilities.

4. From the Value list on the Advanced tab, select one of the following:

 Both - Implements Magic Packet and Wake Up Frame.

 Magic Packet - Selects Magic Packet as the Wake Up frame.

 None - Selects no wake-up frame.

 Wake Up Frame - Selects Wake Up Frame as the wake-up frame

and allows the network adapter to wake up the system when an

event, such as a ping or an ARP request, is received.

5. Click OK.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 81 82

Sem comentários

Allied-telesis AT-2812FX Manual do Utilizador Página 73