Allied-telesis AT-S102 Manual do Utilizador descarregar pdf (Página 106)

Chapter 5: Configuring the AT-CV5M02 Management Card

106

Assigning Contact and Location Information

Menus To enter the chassis’ location and the name of the network manager

responsible for managing the chassis:

1. From the Main Menu, select Configuration to display the

Configuration Menu shown in Figure 26 on page 100.

2. From the Configuration Menu, select System Configuration to

display the menu in Figure 27 on page 100.

3. From the System Configuration Menu, select System Parameters

Configuration to display the menu in Figure 28 on page 101.

4. Select IP Parameters to display the menu in Figure 29 on page 101.

5. To enter the location of the chassis, select Location. The location can

be up to 20 alphanumeric characters. Spaces and special characters

are permitted. To delete the current location without entering a new

location, press the space bar once.

6. To enter the name, phone number, or other information that identifies

the person responsible for managing the system, select Contact and

enter a value of up to 20 alphanumeric characters. Spaces and special

characters are permitted. To delete the current location without

entering a new location, press the space bar once.

7. To save your changes in the master configuration file, return to the

System Configuration Menu and select Save System

Configurations.

Web Browser To enter the contact and location information from the web browser

windows:

1. Select Configuration from the left menu bar.

2. Select the SNMPv1 & SNMPv2c tab. The SNMPv1 & SNMPv2c tab is

shown in Figure 31.

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 373 374

Sem comentários

Allied-telesis AT-S102 Manual do Utilizador Página 106