Allied-telesis AT-S102 Manual do Utilizador descarregar pdf (Página 119)

Converteon Management Software User’s Guide

119

Resetting the Management Card

This procedure is used to reset the management card in the chassis. You

might reset the card if it is experiencing a problem. You can also reset the

card using the CPU Reset button on the card’s front panel.

Review the following information before resetting the management card:

 In most situations, resetting the management card will not affect the

network operations of the media converter line cards in the chassis.

However, if you changed but did not save the parameter settings of a

media converter line card in a slot where the auto-copy feature is

enabled, the line card will revert to its previous settings after the

management card resets. This may affect the operations of the line

card, resulting in the loss of some network traffic.

 Any changes you’ve made to the parameter settings of the

management card but not saved in the master configuration file are

discarded when the card is reset. To save the parameter settings,

return to the Main Menu and select Configuration and Save System

Confirmation or Save System and All Line Card Confirmations.

 Resetting the management card ends your management session. To

continue managing the chassis, wait approximately one minute for the

management card to initialize its management software and afterwards

start a new management session.

 If the chassis has two AT-CV5M02 Management Cards, resetting the

active card activates the standby management card. To resume

managing the chassis, wait twenty seconds for the standby card to

transition to the active state and then start a new management

session. For more information, refer to “Active and Standby

Management Cards” on page 28.

Menus To reset the AT-CV5M02 Management Card from the menus:

1. From the Main Menu, select Module Status and Configuration. For

the description and an example of the Module Status and

Configuration window, refer to “Displaying the Status of the Line

Cards” on page 158.

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 373 374

Sem comentários

Allied-telesis AT-S102 Manual do Utilizador Página 119