Allied-telesis AT-S102 Manual do Utilizador descarregar pdf (Página 153)

Converteon Management Software User’s Guide

153

Displaying the Inter-process Communication Monitor

The management card has an inter-process communication (IPC) monitor

that you can use as a diagnostic tool to view the communications between

the management card and the line cards across the backplane in the

chassis.

Menus To view the IPC monitor from the menus:

1. From the Main Menu, select Diagnostics.

2. From the Diagnostics menu, select Real-Time IPC Message

Analyzer. Figure 18 is an example of an entry.

Figure 57. Real-time IPC Message

The columns of information are described in Table 18

> RX_POLL_CM3XXX_RP [02->04] L_1352 LI(0.500s) CI(0.500s) CY(00.879s) LC(0.769s) IPC(0.449s) NMSG(00) NBUF(010)

Table 18. IPC Message

Column Description

> RX or

< TX

The column indicates the direction and purpose of the

transaction, and the media converter series of the

affected line card. The possible symbols are:

> RX The management card received a packet from the

line card.

< TX The management card transmitted a packet to the

line card.

-> or

This column displays the slot numbers of the

management card and the affected line card, and the

direction of the communication. The first number is the

slot number of the management card. The possible

symbols are:

-> The transmission was from the management card to

the line card.

<- The transmission was from the line card to the

management card.

L This column displays the length of the packet in bytes.

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 373 374

Sem comentários

Allied-telesis AT-S102 Manual do Utilizador Página 153