Allied-telesis AT-S106 Manual do Utilizador descarregar pdf (Página 108)

Chapter 8: Simple Network Management Protocol (SNMP)

108

Creating a Host Table

Use the following procedure to create a Host Table.

1. From the main menu on the left side of the page, select the SNMP

folder.

The SNMP folder expands.

2. From the SNMP folder, select Host Table.

The Host Table Page is displayed. See Figure 33.

Figure 33. Host Table Page

3. To specify an entry number, type a value between 1 and 10 in the

Entry number field.

4. For an SNMP community that you previously defined in the

Community Table page, enter an IP address.

The IP address must be in the xxx.xxx.xxx.xxx format.

5. Select a community name from the pull-down menu next to the

Community Name field.

6. Click Add.

The new host is added to the table.

7. From the main menu on the left side of the page, select Save

Configuration to Flash to permanently save your changes.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 225 226

Sem comentários

Allied-telesis AT-S106 Manual do Utilizador Página 108