Allied-telesis AT-S106 Manual do Utilizador descarregar pdf (Página 111)

AT-S106 Management Software Web Browser User’s Guide

111

Enabling or Disabling Traps

To enable or disable a trap for an SNMP community, do the following

procedure:

1. From the main menu on the left side of the page, select the SNMP

folder.

The SNMP folder expands.

2. From the SNMP folder, select Trap Setting.

The Trap Setting Page is displayed. See Figure 34.

Figure 34. Trap Setting Page

3. Type a trap number between 1 and 10 in the Entry number field.

4. Select the SNMP version of the trap by selecting V1 for SNMP version

1 or V2c for SNMP version v2c in the Version field.

5. Enter an IP address, in the xxx.xxx.xxx.xxx format, in the IP Address

field.

6. Enter a previously defined community name in the Community field.

7. Click Add.

A new trap is displayed in the Trap Setting table.

8. From the main menu on the left side of the page, select Save

Configuration to Flash to permanently save your changes.

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 225 226

Sem comentários

Allied-telesis AT-S106 Manual do Utilizador Página 111