Allied-telesis AT-S80 Manual do Utilizador descarregar pdf (Página 130)

Chapter 11: Simple Network Management Protocol (SNMP)

130 Section I: Using the Menus Interface

4. Type A to select Add New Host Entry.

The following prompt is displayed:

Enter entry number>

a. Enter a value between 1 and 10. Then press Enter.

The following prompt is displayed:

Enter IP address for host>

b. Enter an IP address for an SNMP community that you previously

defined in the Community Configuration menu. The IP address

format must be in the xxx.xxx.xxx.xxx format. See “Creating an

SNMP Community” on page 124.

The following prompt is displayed:

Enter community name>

c. Enter the community name for an existing SNMP community that

you previously defined in the Community Configuration menu. See

“Creating an SNMP Community” on page 124.

5. Type Q to select Quit to previous menu and save your changes.

Deleting an Host

Entry

To delete an entry from the Host Community Menu, perform the following

procedure:

1. From the Main Menu, type B to select Basic Switch Configuration.

The Basic Switch Configuration Menu is shown in Figure 26 on page

124.

2. From the Basic Switch Configuration Menu, type N to select SNMP

Configuration.

The SNMP Configuration Menu is shown in Figure 27 on page 125.

3. From the SNMP Configuration Menu, type H to select Host

Configuration.

The Host Configuration Menu is displayed in Figure 29 on page 129.

4. Type D to select Delete Host Entry.

The following prompt is displayed:

Enter entry number>

a. Enter the number of the SNMP community that you want to

remove from the list of SNMP hosts. Then press Enter.

1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 345 346

Sem comentários

Allied-telesis AT-S80 Manual do Utilizador Página 130