Allied-telesis AT-S80 Manual do Utilizador descarregar pdf (Página 262)

100

101

Chapter 26: IGMP Snooping

262 Section II: Using the Web Browser Interface

Configuring IGMP Snooping

This procedure explains how to set IGMP snooping and the IGMP

Snooping age-out timer on the switch.

To configure IGMP snooping, perform the following procedure:

1. From the bookmarks on the left side of the page, select Bridge.

The Spanning Tree folder expands.

2. From the Spanning Tree folder, select IGMP Snooping.

The IGMP Snooping Page is shown in Figure 71.

Figure 71. IGMP Snooping Page

3. To enable or disable IGMP Snooping on the switch, select Enable or

Disable. Then press Apply.

By default, IGMP is disabled.

4. To set the age-out timer, type the number of seconds you want the

switch to wait before it purges an inactive dynamic MAC address.

Then press Apply.

For an IGMP member port, the Set Age-Out Timer is set to 280

seconds by default. The range of this parameter is from 280 to

420 seconds.

For an IGMP router port, the Set Age-Out Timer is set to 130 seconds

by default. This value cannot be changed.

1 2 ... 257 258 259 260 261 262 263 264 265 266 267 ... 345 346

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S80 Manual do Utilizador Página 262

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S80