Allied-telesis AT-WL2411 Manual do Utilizador descarregar pdf (Página 187)

AT-WL2411 Version 1.80 Installation and User’s Guide

187

Entering the

Access Point

Monitor

You can enter the access point monitor only through a connection on

the serial port and only during the boot process.

To enter the access point monitor, do the following:

❑ Press any key on the keyboard when you see this message

displayed during the boot process:

<Press any key within 5 seconds to enter the

access point monitor>

Note

Certain functions available through the access point monitor can

erase your configuration information. Allied Telesyn strongly

recommends that you only use the access point monitor when

absolutely necessary. For example, you might use the access point

monitor to upgrade your firmware or when instructed to do so by

qualified Allied Telesyn personnel.

1 2 ... 182 183 184 185 186 187 188 189 190 191 192 ... 235 236

Sem comentários

Allied-telesis AT-WL2411 Manual do Utilizador Página 187