Allied-telesis AT-WL2411 Manual do Utilizador descarregar pdf (Página 48)

Configuration Overview

Using SNMP

The access point supports SNMP management. Contact your Allied

Telesyn representative for information about obtaining a copy of the

MIB. The passwords for accessing the SNMP community table are shown

below.

Type of Access MIB Password

read only public

read/write CR52401

Configuring the

SNMP

Community

Simple Network Management Protocol (SNMP) community strings are

passwords used by SNMP. When you use an SNMP client, you must enter

the correct community string to gain access to the access point SNMP

interface.

To configure the SNMP community, perform the following procedure:

1. Establish a Web browser session if you have not already done so. For

more information, see Using a Web Browser on page 43.

2. From the Main Menu, select Network Management. The Community

Strings screen as shown in Figure 15 is displayed.

Figure 15 Community Strings Screen

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 235 236

Sem comentários

Allied-telesis AT-WL2411 Manual do Utilizador Página 48