Allied-telesis AT-S62 Manual do Utilizador descarregar pdf (Página 257)

100

101

AT-S62 Command Line User’s Guide

257

SET STP PORT

Syntax

set stp port=port

[pathcost|portcost=auto|portcost]

[portpriority=portpriority]

Parameters

port Specifies the port you want to configure. You can

configure more than one port at a time. You can

specify the ports individually (for example, 5, 7, 22), as

a range (for example, 18-23), or both (for example, 1, 5,

14-22).

pathcost Specifies the port’s cost. The parameters are

portcost equivalent. The spanning tree algorithm uses the cost

parameter to decide which port provides the lowest

cost to the root bridge for that LAN. This parameter

can take the range of 1 (Automatic Update) to 65,535,

or AUTO. The default setting is AUTO, for Automatic

Update, which automatically sets port cost according

to the speed of the port. Table 5 lists the STP port costs

with Auto-Detect.

Table 6 lists the STP port costs with Auto-Detect when

a port is part of a port trunk.

Table 5 STP Auto-Detect Port Costs

Port Speed Port Cost

10 Mbps 100

100 Mbps 10

1000 Mbps 4

Table 6 STP Auto-Detect Port Trunk Costs

Port Speed Port Cost

10 Mbps 4

100 Mbps 4

1000 Mbps 1

1 2 ... 252 253 254 255 256 257 258 259 260 261 262 ... 419 420

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S62 Manual do Utilizador Página 257

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S62