Allied-telesis AT-S62 Manual do Utilizador descarregar pdf (Página 271)

100

101

AT-S62 Command Line User’s Guide

271

no, off, false The port is not an edge port. The

values are equivalent.

ptp Defines whether the port is functioning as a point-

pointtopoint to-point port. The parameters are equivalent. This

type of port is connected to a device operating at

full-duplex mode. Values are:

yes, on, true The port is an point-to-point

port. The values are equivalent.

no, off, false The port is not an point-to-point

port. The parameters are

equivalent. are equivalent.

autoupdate The port’s status is determined

automatically. This is the default.

migrationcheck Enables and disables migration check. The purpose

of this feature is to change from the RSTP mode to

the STP mode if STP BDPU packets are received on

the selected port. When you enable this option, the

bridge will send out RSTP BPDU packets from the

selected port until STP BPDU packets are received.

The port will remain in the RSTP mode until it

receives an STP BPDU packet. The values are:

yes, on, true Enable migration check. The

values are equivalent.

no, off, false Disable migration check. The

values are equivalent.

Description

This command sets a port’s RSTP settings.

Examples

The following command sets the port cost to 1,000,000 and port priority

to 224 (increment 14) on port 4:

set rstp port=4 portcost=1000000 portpriority=14

The following command changes ports 6 to 8 so they are not considered

edge ports:

set rstp port=6-8 edgeport=no

1 2 ... 266 267 268 269 270 271 272 273 274 275 276 ... 419 420

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S62 Manual do Utilizador Página 271

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S62