Allied-telesis AT-S70 Manual do Utilizador descarregar pdf (Página 105)

AT-S70 Management Software User’s Guide

105

OAM Loopback Test

This section contains the procedures on how to manage the OAM

loopback test.

Enabling or

Disabling Remote

Loopback Test

To enable or disable the OAM remote loopback test, perform the following

procedure:

1. From the Main Menu, select Module Status and Configuration.

The Module Status and Configuration Menu, as shown in Figure 2 on

page 91, is displayed.

2. Select a line card on which you want to configure.

3. Press <Return>.

The Module Configuration Menu, as shown in Figure 4 on page 92, is

displayed.

4. Select the port that you want to configure the OAM operations on.

5. Press <Return>.

The Port Management Menu, as shown in Figure 6 on page 92, is

displayed.

6. From the Port Management Menu, select OAM Configurations.

The OAM Configuration Menu, as shown in Figure 7 on page 93, is

displayed.

7. From the OAM Configuration Menu, select the OAM Loopback Test

Menu.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 131 132

Sem comentários

Allied-telesis AT-S70 Manual do Utilizador Página 105