Allied-telesis AT-S70 Manual do Utilizador descarregar pdf (Página 28)

Chapter 3: AT-S70 Management Security Features

Manager and Operator Passwords

The AT-S70 management software has two levels of management

access: Manager and Operator. The Manager account allows you to

configure all parameters of a Converteon chassis, while the Operator

account only allows you to view the parameter settings. The default login

name for Manager access is “manager” and the password is “friend”. The

default login name and password for Operator access are both “operator”.

Note

Once the password has been changed and is forgotten, you must

call Technical Support to have it reset back to the default password.

For Technical Support contact info, refer to “Contacting Allied

Telesyn” on page 12.

Configuring the

Management

Passwords

To prevent unauthorized access to the management program, you can

assign a password to the program. Any person who starts the interface will

be required to enter the password, regardless of how they access the

program (i.e., RS-232 port, Telnet, or SNMP management program). For

detailed information on the management program, refer to Chapter 1,

”Overview” on page 14.

To change the Manager or Operator password, perform the following

procedure:

1. From the Main Menu, select System Configuration.

The System Configuration Menu, as shown in Figure 3 is displayed.

Figure 3. System Configuration Menu

System Configuration Menu

System Name: Converteon

System Date (mm/dd/yy) 00/00/00

System Time (hh:mm:ss) 00:16:32

Omega Options

IP Parameters

Terminal Configuration

Temperature Threshold Configuration

Return to Main Menu...

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 131 132

Sem comentários

Allied-telesis AT-S70 Manual do Utilizador Página 28