Allied-telesis AT-S97 Manual do Utilizador descarregar pdf (Página 52)

Chapter 4: IP Configuration Commands

IP SET

Syntax

ip set ip-address=

ipaddress

subnetmask=

mask

default-gateway=

ipaddress

Parameters

ip-address Specifies an IP address for the AT-MCF2000M

Management Module. The default value is 10.0.0.1.

subnetmask Specifies a subnet mask for the management module’s IP

address. The mask can be of variable length. The default

value is 255.255.252.0.

default-gateway

Specifies a default gateway for the management module.

The default gateway must be a member of the same subnet

as the module’s IP address. The default value is 0.0.0.0.

Privilege Levels

Administrator and read-write.

Description

This command manually assigns an IP address, subnet mask, and default

gateway address to the AT-MCF2000M Management Module. For

information on when to assign an IP configuration to the module, refer to

“Overview” on page 48.

Note

You cannot assign an IP configuration to the management module if

the DHCP and BOOTP clients are active. You must first disable the

clients with the IP DHCP DISABLE command. For information, refer

to “IP DHCP DISABLE” on page 50. To determine the status of the

clients, refer to “IP SHOW” on page 54.

Examples

This command assigns the IP address 149.22.67.8, subnet mask

255.255.255.224, and default gateway 149.22.67.247 to the

AT-MCF2000M Management Module:

ip set ip-address=149.22.67.8 subnetmask=255.255.255.224

default-gateway=149.22.67.247

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 253 254

Sem comentários

Allied-telesis AT-S97 Manual do Utilizador Página 52