Allied-telesis AT-S97 Manual do Utilizador descarregar pdf (Página 64)

Chapter 5: General System Commands

SYSTEM SET LOCATION

Syntax

system set location=

location

Parameters

location Specifies a location of up to 25 alphanumeric characters for

the chassis or stack. Spaces are allowed, but a location

with spaces must be enclosed in double quotes (“ “). To

remove the current value without specifying a new value,

enter “none.”

Privilege Levels

Administrator and read-write.

Description

This command sets the location of the chassis or stack. This information

can be helpful in locating the different media converter units in your

network. To view the current value for this parameter, refer to “SYSTEM

SHOW INFO” on page 68.

Examples

This command sets a stack’s location to “Bldg 3, rm 212:”

system set location="Bldg 3, rm 212"

This command removes the current location without assigning a new

value:

system set location=none

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 253 254

Sem comentários

Allied-telesis AT-S97 Manual do Utilizador Página 64