AT-S26 Version 2.2.2 Management Software Release Notes
PN 613-50264-00 Rev A 6 Allied Telesyn International
• Telnet and Local Management Sessions
You cannot run a Telnet management session and a local management session on the
same switch simultaneously. Always be sure to properly exit from a Telnet or local
management session to prevent future management sessions from being blocked.
Limitations
• Upgrading the AT-S26 Management Software Switch to Switch
You cannot upgrade the AT-S26 management software switch to switch. To upgrade
switch software, you can use TFTP or the RS232 port on the switch and XModem. For
further information, refer to Chapter 8 in the AT-S26 Version 2.0.1 User’s Guide.
• Port Mirroring
This version of the management software does not support port mirroring.
• IGMP
AT-S26 Version 2.0.1 supports IGMP Version 1.0, but not Version 2.0.
• RMON and Uplink Ports
RMON alarms and the RMON log are not generated for uplink ports.
• Dynamic Host Configuration Protocol (DHCP)
The switch will not release an IP address assigned to it by a DHCP server after the lease has
expired. You can either assign the switch an IP address manually through the Omega
interface or you can configure the DHCP server to permanently assign an IP address to the
switch.
Comentários a estes Manuais