Allied Telesis Rapier 16Fi-FX Guia de Instalação Página 207
- Página / 283
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
IP Multicasting show pim route 113
Expiry time The time remaining until this entry is deleted, in
seconds. A zero value indicates that the timer is not
running. This timer decrements when there are no
(S,G) entries.
Join/prune
time
The join/prune timer in seconds. When the switch
sees a prune message on the correct upstream
interface, and it still needs to receive traffic via that rp
tree, it sends a join message when this timer expires.
A zero value indicates that the timer is not running.
Immediate
output
interfaces
The interfaces with downstream routers or IGMP
hosts that are interested in this (*,G) entry.
(S,G) The entry for traffic from a particular source to a
particular group.
Source The IP address of the multicast sender.
RPF Neighbour
to Src
The address of the PIM neighbour to the source,
taking into account any PIM assert messages. Packets
from the source would be received from this
neighbour. “Directly connected” indicates that the
source is directly connected to the switch.
RPF Interface
to Src
The interface on which packets from the source
would be received, if the source is in this multicasting
domain.
Expiry time The time remaining until this entry is deleted, in
seconds. A zero value indicates that the timer is not
running. The expiry time is 20 seconds longer than
the keepalive time.
Keepalive
time
The Keepalive timer in seconds. A zero value indicates
that the timer is not running because no data is being
received.
Join/prune
time
The join/prune timer in seconds. When the switch
sees a prune message on the correct upstream
interface, and it still needs to receive traffic via that sp
tree, it sends a join message when this timer expires.
A zero value indicates that the timer is not running.
Register time The register suppression time, in seconds. When this
timer reaches the register probe time, a null register
message is sent to the RP.
SPT bit Whether forwarding is set on the shortest path tree.
Inherited
output
interfaces
The interfaces to forward (S,G) data to.
Immediate
output
interfaces
The interfaces with downstream routers or IGMP
hosts that are interested in this (S,G) data.
Table 15: Parameters in output of the show pim route command for PIM Sparse Mode
Parameter
Entry
Typ e
Parameter for
Entry Type Meaning
- Software Version 2.9.1 1
- 2 Release Note 2
- Release Licences 5
- Upgrading the GUI File 5
- Backwards Compatibility 6
- Overview of New Features 7
- AT-8624POE Fan Enhancements 9
- C613-10486-00 REV C 10
- VPN Configuration Wizards 11
- Command Changes 12
- System Enhancements 13
- Command Reference Updates 14
- Switching Enhancements 18
- PoE Firmware Upgrade 20
- SHDSL Enhancements 23
- Bridging Enhancements 26
- Software Version 2.9.1 27 27
- Training VLAN VID=2 28
- PPP Link 28
- Software Version 2.9.1 31 31
- Syntax SHow BRIDge 32
- Dynamic DNS Client 33
- Within a Subnet 34
- IP Debug Timeout 35
- Software Version 2.9.1 37 37
- Software Version 2.9.1 41 41
- Syntax SHow DDNS 42
- DHCP Enhancements 45
- DHCP Snooping Enhancements 50
- IP Multicasting Enhancements 55
- OSPF Enhancements 59
- BGP Enhancements 61
- IPv6 Enhancements 63
- ■ all static routes 64
- ■ all interface routes 64
- Firewall Enhancements 65
- Software Version 2.9.1 75 75
- ALG, use the command: 86
- Associations 88
- Changes to Local Commands 94
- IP Multicasting 95
- IP Multicasting 3 97
- IP Multicast Routing 98
- IP Multicasting 5 99
- PIM Dense Mode 100
- Configuring PIM Dense Mode 101
- General PIM-DM 102
- IP Multicasting 9 103
- PIM Sparse Mode 103
- 10 Software Reference 104
- Rendezvous point 105
- IP Multicasting 11 105
- 12 Software Reference 106
- Configuring PIM Sparse Mode 107
- Bootstrap router 108
- General PIM-SM 109
- IP Multicasting 17 111
- Configuring IGMP 112
- Static IGMP 113
- IGMP Proxy 114
- IGMP Snooping 116
- Downstream routers 117
- Fast Leave 118
- Query Solicitation 118
- IP Multicasting 25 119
- IGMP Filtering 120
- IGMP Throttling 122
- IP Multicasting 29 123
- Dynamic MVR 123
- Compatible MVR 123
- Immediate Leave 124
- Configuring MVR 124
- Configuration Examples 125
- Switch B 126
- Switch A 126
- Switch C 126
- Command Reference 134
- IP Multicasting enable pim 69 163
- [interface=vlan] 167
- ■ DVMRP Routers, 224.0.0.4 168
- ■ All PIM routers, 224.0.0.13 168
- ■ IGMP is enabled globally 170
- ■ the interface is active 170
- IP Multicasting set ip mvr 77 171
- 78 set pim Software Reference 172
- Syntax SHow IP IGMP DEBug 191
- Syntax SHow PIM COUnters 197
- Table 11 on page 104) 197
- Syntax SHow PIM INTerface 202
- VLAN (such as vlan1, vlan1-1) 202
- Syntax SHow PIM ROUte 205
- Syntax SHow PIM RPSet 212
- Introduction 217
- Link Layer Discovery Protocol 217
- Type Length Values 218
- Transmission and Reception 219
- Transmission 220
- Reception 220
- Storing LLDP Information 221
- Configuring LLDP 223
- Monitoring LLDP 224
- LLDP Triggers 225
- 802.1AB-2005 251
- LLDP neighbours is displayed 255
- MAC-Forced Forwarding 259
- 2 Software Reference 260
- MAC-Forced 261
- Forwarding with 261
- DHCP snooping 261
- Isolating clients using VLANs 262
- Manually adding 263
- ■ ARP packets 264
- Debugging 265
- Logging 265
- 8 Software Reference 266
- See Also show macff interface 277
- Syntax SHOW MACFF DATABase 278
Manuais e produtos relacionados com Comutadores de rede Allied Telesis Rapier 16Fi-FX
(44 páginas)
(51 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.043 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais