Allied Telesis Rapier 16Fi-FX Guia de Instalação descarregar pdf (Página 274)

16 set macff server Software Reference

set macff server

Syntax SET MACFF SERVer INTerface=vlan IPaddress=ipadd

DESCription={desc}

Description This command allows you to change the description of a statically configured

AR or AS. You cannot modify the IP address or interface, as these two values

are used as unique keys to permit device identification.

This command requires a user with security officer privilege when the switch

is in security mode.

Examples To set the description of an AR with the IP address 192.168.5.2, which is

attached to vlan5, to “Main LAN Gateway (Eva)”, use the command:

set macff serv int=vlan5 ip=192.168.5.2 desc=”Main LAN

Gateway (Eva)”

To remove the description of an AS with the IP address 192.168.5.3, which is

attached to vlan7, use the command:

set macff serv int=vlan7 ip=192.168.5.3 desc=

See Also add macff server

delete macff server

Parameter Description

INTerface The interface that the AR or AS is attached to. vlan is the name of a

VLAN interface such as vlan46 or vlan122.

IPaddress The IPv4 address of the AR or AS, in dotted decimal notation.

DESCription An arbitrary description for the AR or AS. This can be between 0 to 255

characters long, and use any printable character. Leaving the option

blank removes the current description without adding a new

description.

1 2 ... 269 270 271 272 273 274 275 276 277 278 279 ... 282 283

Sem comentários

Allied Telesis Rapier 16Fi-FX Guia de Instalação Página 274