Allied Telesis AT-8000S Guia do Utilizador descarregar pdf (Página 151)

Configuring Power Over Ethernet

Page 152

Figure 115:Power Over Ethernet Page

The Power Over Ethernet Page contains the following fields:

Global PoE Configuration

• Power Threshold — Indicates the percentage of power consumed before an alarm is generated. The value

range is 1-99 percent; the default value is 95 percent.

If maximum power available is 375 W, and the power threshold is 95%, the threshold is exceeded when the

PoE devices require more than 356.25 W.

• Maximum Power Available — Indicates the maximum power allocated to the device.

• Unit Number — Indicates the stacking member for which the PoE information is displayed.

The Zoom View shows device ports and indicators of current PoE port status. The possible port settings are:

2. Click the ports to enable. Clicking a port toggles it through the possible settings.

3. Define the fields.

4. Click Modify. PoE is enabled on the device and global settings are saved. The new threshold is immediately

activated on the device.

5. Click Save Config on the menu to permanently save the change.

Port is active — Indicates that the port is linked.

Port is inactive — Indicates that the port is not linked.

Port is disabled — Indicates that the port is disabled.

Port is selected — Indicates that the port is selected.

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 203 204

Sem comentários

Allied Telesis AT-8000S Guia do Utilizador Página 151