Allied Telesis AT-8000S Guia do Utilizador descarregar pdf (Página 156)

Configuring Services

Page 157

• Select the interfaces displayed in the table.

– Ports of Unit — Specifies the port and stacking member for which the CoS configuration is displayed.

– Trunk — Specifies the trunk for which the CoS configuration is displayed.

• Interface — Displays the interface number.

• Default CoS— Determines the default CoS value for incoming packets for which a VLAN tag is not defined.

The possible field values are 0-7. The default CoS is 0. This field appears in the CoS Ports table.

• Restore Defaults — Restores the factory CoS defaults. The possible field values are:

– Checked — Restores the factory CoS defaults on the interface.

– Unchecked — Maintains the current CoS settings. This is the default value.

2. Select the interfaces.

3. Check the Restore Defaults option, where needed.

4. Click Modify. The CoS Configuration Page opens:

Figure 118:CoS Configuration Page

The CoS Configuration Page contains the following fields:

• Interface — Sets this CoS configuration for a port or trunk.

– Port — Defines CoS for a specific port.

– Trunk — Defines CoS for a specific trunk.

• Set Default User Priority — Indicates the priority level for CoS on the selected port/trunk. Default Priority

determines the default CoS value for incoming packets. The value range is 0-7 and the default is 0.

5. Select the Interface and the Priority level.

6. Click Apply. The CoS settings for the selected port/trunk are updated.

7. Click Save Config on the menu to save the changes permanently.

1 2 ... 151 152 153 154 155 156 157 158 159 160 161 ... 203 204

Sem comentários

Allied Telesis AT-8000S Guia do Utilizador Página 156