Allied Telesis AT-8000S Guia do Utilizador descarregar pdf (Página 85)

Configuring Ports

Aggregating Ports

Page 86

• LACP — Indicates if LACP is enabled on the trunk. The possible values are:

– Enable — LACP is enabled on the trunk.

– Disable — LACP is disabled on the trunk.

• PVE — Enables a port to be a Private VLAN Edge (PVE) port. When a port is defined as PVE, it bypasses the

Forwarding Database (FDB), and forwards all Unicast, Multicast and Broadcast traffic to an uplink (except

MAC-to-me packets). Uplinks can be a port or GE port. Traffic from the uplink is distributed to all interfaces.

2. Click Modify. The Trunk Setting Configuration Page opens:

Figure 57: Trunk Setting Configuration Page

The Trunk Setting Configuration Page contains the following fields:

• Trunk— Lists the names of configured trunks.

• Description — Provides a user-defined trunk description.

• Type — Indicates the type of trunk.

• Admin Status — Displays the link operational status. Changes to the trunk state are active only after the

device is reset. The possible field values are:

– Up — Indicates that the trunk is currently operating.

– Down — Indicates that the trunk is currently not operating.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 203 204

Sem comentários

Allied Telesis AT-8000S Guia do Utilizador Página 85