Allied Telesis Patch 86261-04 Manual do Utilizador descarregar pdf (Página 42)

42 set ospf Patch Release Note

Patch 86261-09 for Software Release 2.6.1

C613-10388-00 REV J

set ospf

Syntax SET OSPF [BGPFilter={NOne|300...399}]

[BGPImport={ON|OFF|True|False|YES|NO}]

[BGPLimit=1...300] [other-parameters]

Description This command sets general OSPF routing configuration parameters. Use this

command to configure the importing of BGP routes into OSPF. See Table 4 on

page 42 for details about each parameter.

Table 4: Parameters for the BGP route import feature in the set ospf command

Parameter Option/Range Description

BGPFilter NOne No filters are defined so all routes from BGP will be imported into OSPF. The default

is none.

300...399 The route filter that will be used when importing BGP routes into OSPF. Route filters

are created with the add ip filter command. If a route filter is defined, the entries

for the filter will include or exclude routes for importation. If routes have not been

included by a previous entry, they will be excluded from the import.

BGPImport ON|True|YES Importing BGP routes into OSPF is enabled.

OFF|False|NO Importing BGP routes into OSPF is disabled. The default is off.

BGPLimit 1...300 The maximum number of BGP routes that can be imported into OSPF at a time. Once

this limit is reached, importing stops until existing routes are removed. The default

is 300.

*Caps denote command shortcuts

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 48

Sem comentários

Allied Telesis Patch 86261-04 Manual do Utilizador Página 42