Allied-telesis AT-8202 Manual do Utilizador descarregar pdf (Página 13)

AT-8202 ATM Uplink User’s Guide

1-5

To configure CIP services:

1. Use the VLAN/SHOW/VLAN command to verify that a valid IP

address exists.

The

VLAN/SHOW/VLAN command displays the following

information:

2. Create the CIP service using the

ATM/CONFIG/CREATE/CIP

<CIP Index> command.

The valid CIP index values are from 0-15.

A sample screen is shown in Figure 1-2. Table 1-2 provides a

description of each parameter.

Figure 1-2 Configuring CIP

/VLAN/SHOW/VLAN

Virtual LAN Information:

VLAN VLAN IP Network Admin Operation Port

ID Description Address Status Status Membership

==== =============== ========== ====== ========= ==========

1 Default VLAN(#1 1.1.1.1 ENABLE ACTIVE 1-16

/ATM/CONFIG/CREATE > CIP 7

CIP Configuration

1. CIP Index: 7

2. IP Address: 137.168.132.7

3. IP Subnet Mask: 255.255.255.0

4. Description (Optional): CIP Test 7

5. Admin Status (ENABLE(a), DISABLE(b)): ENABLED

6. Connection Type (PVC(a), SVC(b)): SVC

7. VCI Value (Reqd if PVC):

8. Arp Server ATM Address (Reqd if SVC):

9. Mtu Size: 9180

10. RIP mode (Active (a), Deaf (b), Silent (c), Inactive (d)): 0

Enter Selection, 0 to save the Modification or ‘q’ to Quit: 0

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 79 80

Sem comentários

Allied-telesis AT-8202 Manual do Utilizador Página 13