Allied-telesis AT-8202 Manual do Utilizador descarregar pdf (Página 26)

Configuring Trunking

1-18

3. Enter 5 at the prompt for VCI value configuration.

Note

You must enter a VCI value when configuring a PVC connection type.

Additionally, make sure the PVC number is identical on all

FORMULA 8200 switches. This must be a different value from the

PTOP.

4. Enter the VCI value when prompted:

5. Enter 0 to save the selection.

6. Bind the port service for trunking by using the

/PORTSERV/

CONFIG/CREATE

command.

Note

Use the value of 34 for binding port service to trunk for ATM.

Enter Selection, 0 to save the Modification or 'q' to Quit: 5

Enter VCI value: 502

TRUNK Configuration

1. TRUNK Index: 1

2. Description (Optional): TRUNK Instance 1

3. Admin Status(ENABLE(a),DISABLE(b): ENABLED

4. Connection Type (PVC(a), (SVC(b): PVC

5. VCI value (Reqd if PVC): 502

6. Destination ATM Address (reqd if SVC):

Enter Selection, 0 to save the Modification or ‘q’ to Quit: 0

New VCI value

Enter Selection, 0 to save the Modification or 'q' to Quit: 0

Updating ATM configuration...

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 79 80

Sem comentários

Allied-telesis AT-8202 Manual do Utilizador Página 26