Allied-telesis AT-8202 Manual do Utilizador descarregar pdf (Página 16)

Configuring the LAN Emulation Client (LEC)

1-8

Note

If an IP address does not exist for this VLAN, enter an IP address for the

FORMULA 8200 using the

VLAN/CONFIG/VLAN # command. Refer

to the FORMULA 8200 User’s Guide for details.

2. Create the LEC service using the

ATM/CONFIG/CREATE/LEC

<LEC Number> command.

The LEC Configuration information is shown in the following

screen. Table 1-3 provides a description of the parameters on

the LEC Configuration screen.

/VLAN/SHOW/VLAN

Virtual LAN Information:

VLAN VLAN IP Network Admin Operation Port

ID Description Address Status Status Membership

==== =========== ========== ====== ========= ==========

1 Default VLAN(#1 1.1.1.1 ENABLE ACTIVE 1-16

/ATM/CONFIG/CREATE > LEC 1

LEC Configuration

1. LEC Number: 1

2. LEC Description (Optional):

3. ELAN Name (applicable only in AUTO mode):

4. Use LEC Config Server ATM (Yes(a), No(b)): Yes

5. LEC Config Server ATM Address (Option 5a): 0x47009900000000

00000000000000a03e00000100

6. Control Time-out (in seconds): 10

7. Max. Unknown Frame Count: 1

8. Max. Unknown Frame Time (in seconds): 1

9. VCC Time-out(in seconds): 1200

10. Max. Retry Count: 1

11. Ageing Time (in seconds): 300

12. Expected LE-ARP Resp Time (in seconds): 30

13. Flush Time-out (in seconds): 4

Enter Selection, 0 to save the Modification or ‘q’ to Quit: 0

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 79 80

Sem comentários

Allied-telesis AT-8202 Manual do Utilizador Página 16