Allied-telesis AT-8202 Manual do Utilizador descarregar pdf (Página 48)

ATM/CONFIG/MODIFY Commands

2-20

/ATM/CONFIG/MODIFY >PORT

Atm Port Configuration

1. ATM PVC/SVC Mode (PVC mode (a), SVC mode (b)): SVC mode

2. Signaling Version (3.0(a), 3.1(b)): Uni 3.0

3. ILMI Enable (Enable(a), Disable(b)): Enable

4. ILMI Poll Enable (Enable(a), Disable(b)): Disable

5. Scrambling Enable (Enable(a), Disable(b)): Enable

6. Timing Mode (Loop(a), Local(b)): Local

7. Port ATM Address

Enter Selection, 0 to save the Modification or 'q' to Quit: 0

Table 2-6 ATM/CONFIG/MODIFY/PORT Parameters

Parameter Description

ATM PVC/SVC mode Whether this service provides a permanent virtual circuit or switched

virtual circuit

Signaling Version

(If SVC)

Currently the FORMULA 8200 switch supports UNI 3.0 or UNI 3.1. Set

this value depending upon the user-to-network (UNI) support on the

ATM switch to which you have connected the FORMULA 8200. Reset

the switch when the setting for signaling version changes.

Default: UNI 3.0

ILMI Enable

(If SVC)

Address registration between an ATM end system and an ATM switch

across the UNI

Options: Enable or disable

Default: Enable

ILMI Poll Enable

(If SVC)

Polling feature for checking address registrations between an ATM end

system and an ATM switch across the UNI

Options: Enable or disable

Default: Disable

Scrambling Enable Bit randomization of cells to increase security

Options: Enable or disable

Default: Enable

Timing Mode Timing mode for either the internal (local) or external (loop) clock

Options: Local or loop

Default: Local

Port ATM Address The ATM address for this port

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 79 80

Sem comentários

Allied-telesis AT-8202 Manual do Utilizador Página 48