Allied-telesis AT-S25 Manual do Utilizador descarregar pdf (Página 43)

AT-S25 Management Software User’s Guide

Configuring an IP Address and Switch Name

The procedure in this section explains how to manually assign an IP

address, subnet mask, and gateway address to the switch from a local or

Telnet management interface. (If you wish the switch to obtain its IP

configuration from a DHCP or BOOTP server on your network, go to the

procedure Activating the BOOTP and DHCP Services on page 46.)

This procedure also explains how to assign a name to the switch, along

with other optional information, such as the name of the administrator

responsible for maintaining the unit and the location of the switch.

To manually set a switch’s IP address, perform the following procedure:

1. From the Main Menu, type 4 to select Administration Menu.

The Administration Menu in Figure 10 is displayed.

Figure 10 Administration Menu

2. Enter or modify the parameters in the window as desired.

Changes to the parameters take effect immediately on the switch.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 276 277

Sem comentários

Allied-telesis AT-S25 Manual do Utilizador Página 43