AT-S25 Management Software User’s Guide
81
4. From the Port Trunking menu, type 2 to select Create Gigabit Trunk.
The following prompt is displayed.
Enter Trunk Number -> [1 to 5] ->
5. Enter the number of the port that will constitute the port trunk; then
press the Enter key.
You could specify the ports individually (e.g., 1,2,3,4) or as a range
(e.g., 7-10).
Once you have specified the port(s) of the trunk, the following
menu selection appears in the window:
Enter Trunk Name ->
Enter trunk ports [1 - 8] ->
Press any key to continue.
Comentários a estes Manuais