Allied-telesis AT-S25 Manual do Utilizador descarregar pdf (Página 88)

Section II: Local and Telnet Mangement

6. Type 2 to select Destination Module.

The following prompt is displayed.

Enter Destination Module: [1 to 8] ->

7. Enter the number of the module you wish to set as a destination

module.

8. Type 3 to select Destination Port.

The following prompt is displayed.

Enter Destination Port: (01-24) (0=None):

9. Enter the number of the port you wish to set as a destination port.

10. Type 4 to select Source Module.

The following prompt is displayed.

Enter Source Module: [1 to 8] ->

11. Enter the number of the module you wish to set as a source module.

12. Type 5 to select Source Port.

The following prompt is displayed.

Enter Source Port: (01-24) (0=None):

13. Enter the number of the port you wish to set as a source port.

14. Type S to select Save Configuration changes.

The port mirror is immediately activated on the switch. You could

now connect a data analyzer to the mirror port to monitor the

traffic on the selected ports.

3 - Destination

Port

Mirror port to which traffic will be sent to. This port

cannot be part of a trunk or be one of the mirroring

ports.

Possible settings for this parameter are:

• None (default)

• 1 to 24

4 - Source Module

Mirroring module whose traffic needs to be mirrored.

5 - Source Port

Mirroring port whose traffic needs to be mirrored.

Possible settings for this parameter are:

• None (default)

• 1 to 24

PARAMETER DESCRIPTION

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 276 277

Sem comentários

Allied-telesis AT-S25 Manual do Utilizador Página 88