Allied-telesis AT-S25 Manual do Utilizador descarregar pdf (Página 53)

AT-S25 Management Software User’s Guide

3. From the Advanced Configuration window, type 2 to select SNMP

Configuration. The SNMP Configuration menu in Figure 14 is

displayed.

Figure 14 SNMP Configuration Menu

4. Enter or modify the parameters as desired.

To change a value, type its corresponding number and, when

prompted, enter the new value.

❑ To set a switch’s SNMP community strings, use the parameters

described below:

1 - GET Community

2 - SET Community

3 - TRAP Community

❑ To specify the IP addresses of up to four management

workstations on your network to receive traps from the switch,

use the selections below:

4 - Trap Receiver 1

5 - Trap Receiver 2

6 - Trap Receiver 3

7 - Trap Receiver 4

5. After making your changes, type S to select Save Configuration

changes.

Changes to the SNMP parameters are immediately activated on

the switch.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 276 277

Sem comentários

Allied-telesis AT-S25 Manual do Utilizador Página 53