Allied-telesis AT-S62 Manual do Utilizador Página 28

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 27
Chapter 1: Overview
28
Management Overview
The AT-S62 management software allows you to monitor and adjust the
operating parameters of an AT-8500 Series switch and includes the
following features:
Basic operations such as configuring port and switch parameters,
enhanced stacking, SNMPv1 and v2c, trunking, and mirroring
Advanced operations including file uploads and downloads,
event logging, traffic classifiers, access control lists, denial of
service defense, Quality of Service (QoS), Class of Service (CoS),
and IGMP
SNMPv3
Spanning tree protocols including STP, RSTP, and MSTP
Virtual LANs
Port security options such as 802.1x Port-based Network Access
Control and MAC address tables
Management security including encryption keys, PKI, SSL, Secure
Shell, TACACS+, RADIUS, and management access control lists
The AT-S62 management software is preinstalled on the switch with
default settings for all operating parameters. If the default settings are
adequate for your network, you can use the device as an unmanaged
switch by connecting it to your network, as explained in the hardware
installation guide, and powering on the switch.
Note
The default settings for the management software can be found in
Appendix A, AT-S62 Default Settings on page 715.
To actively manage a switch, you must connect to its management
software. There are two general ways to connect to a switch:
Locally using the RS232 Terminal Port on the switch
Remotely using the Telnet protocol, the Secure Shell (SSH)
protocol, or a web browser
The AT-S62 management software has three management interfaces.
There is a menus interface, a command line interface, and a web browser
interface. You can use the menus interface or the command line
interface when managing the switch locally through the RS232 Terminal
Vista de página 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 759 760

Comentários a estes Manuais

Sem comentários