Allied-telesis AT-S62 Manual do Utilizador descarregar pdf (Página 48)

100

101

Chapter 3: Enhanced Stacking

Section I: Basic Operations 48

Setting a Switch’s Enhanced Stacking Status

The enhanced stacking status of the switch can be master switch, slave

switch, or unavailable. Each status is described below:

❑ Master switch - A master switch of a stack can be used to manage

all the other switches in a subnet. Once you establish a local or

remote management session with the Master switch, you can

access and manage all the switches in the stack.

A master switch should have a unique IP address. You can

manually assign a master switch an IP address or activate the

BOOTP and DHCP client software on the switch.

❑ Slave switch - A slave switch can be remotely managed through a

master switch. It does not need an IP address or subnet mask. This

is the default setting.

❑ Unavailable - A switch with an unavailable stacking status cannot

be remotely managed through a master switch. A switch with this

designation can be managed locally. To be managed remotely, a

switch with an unavailable stacking status must be assigned a

unique IP address.

Note

You cannot change the stacking status of a switch through

enhanced stacking. If a switch does not have an IP address or subnet

mask, such as a slave switch, you must use a local management

session to set stacking status. If the switch has an IP address and

subnet mask, such as a master switch, you can use either a local or a

Telnet management session.

To adjust a switch’s enhanced stacking status, perform the following

procedure:

1. From the Main Menu, type 8 to select Enhanced Stacking.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 759 760

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S62 Manual do Utilizador Página 48

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S62