Allied Telesis AT-iMG606BD Especificações descarregar pdf (Página 162)

100

101

7. Quality of Service (QoS) Example of an iMAP Device Class Policy

153

AlliedView NMS Administration Guide

7.9.1 Creating the QoS Policy Flow

The QoS Policy Flow will be used to create the names for these flows. Following are the steps to create a flow for qos_voice:

1. Click on the Network Services menu and select Create/Edit QoS Configuration -> Create/Edit Flows

2. The QOS Policy Flow Dialog window appears.

3. Click on New Flow and enter qos_voice as the New Name, then Select.

4. The Edit QOS Device Class List appears. Select Telesyn only, then Select.

5. The default classifier (ETHFORMAT=ANY) appears in the Flow Classifiers list. Change this as follows:

1. In the Classifier attribute pull-down, select VID

2. A blank field appears next to VID with a default classifier number. Replace with 701.

3. Click on Click Here to Add or Replace Parameter. The default Classifier is replaced with the VID=701 classifier.

6. Click on Save Flow and OK to confirm. This saves the Policy Flow name qos_voice, and this will appear in pull-downs of

Flow Names where appropriate.

7. Repeat this and create qos_data, qos_video, and [All Packets]. When creating these, you can click on the Copy Flow

qos_voice tic box so that the VID attribute is copied over. You then replace the VID numbers.

7.9.2 Creating the QoS Priority Actions

The QoS Priority Action will be used to create the names for these actions. Following are the steps to create a priority

action for qos_voice:

1. Click on the Network Services menu and select Create/Edit QoS Configuration -> Create/Edit Priority Actions

2. The QOS Priority Action Form appears.

3. Click on New Action and enter voice_priority as the New Name, then Select.

4. The Edit QOS Device Class List appears. Select Telesyn only, then Select.

5. The default priority (FORWARD) appears in the Flow Classifiers list. Change this as follows:

1. In the Priority attribute pull-down, select SETVPRIORITY

2. A blank field appears next to SETVPRIORITY with a default number (0). Replace with 7.

3. Click on Click Here to Add or Replace Parameter. The default Priority is added to the FORWARD action.

4. Click on the FORWARD action and select Delete. Now SETVPRIORITY is the only action parameter.

6. Click on Save Priority Action and OK to confirm. This saves the Priority Action name voice_priority, and this will appear in

pull-downs of Priority Action where appropriate.

7. Repeat this and create data_priority, video_priority, and [No Action]. When creating these, you can click on the Copy

from Action voice-priority tic box so that the SETVPRIORITY is copied over. You then replace the SETVPRIORITY

numbers.

7.9.3 Creating the QoS Traffic Actions

The QoS Traffic Actions will be used to create the names for these traffic actions. Following are the steps to create a traffic

action limit_voice.

1. Click on the Network Services menu and select Create/Edit QoS Configuration -> Create/Edit Traffic Actions

2. The QOS Traffic Action Form appears.

3. Click on New Action and enter limit_voice as the New Name, then Select.

4. The Edit QOS Device Class List appears. Select Telesyn only, then Select.

5. The default actions (RATE and BURSTSIZE) appear in the Traffic Action Parameters list. Change this as follows:

1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 994 995

Comentários a estes Manuais

Sem comentários

Allied Telesis AT-iMG606BD Especificações Página 162

Comentários a estes Manuais

Manuais e produtos relacionados com Gateways/controladores Allied Telesis AT-iMG606BD